Changes to Step #4
Edit by James —
Edit approved by Taylor Dixon
- Before
- After
- Unchanged
Step Lines
| [* black] With one spudger, work your way along the right edge of the iPad. | |
| [* black] The front panel is held to the aluminum back by metal clips on the top, bottom, and left sides. The right side has plastic tabs which slide into recesses in the backplate. | |
| [* black] Once the clips are released, lift the left side of the front panel up and slide it to the left to clear the tabs from the aluminum backplate. | |
| + | [* icon_caution] Be Careful: pry carefully and gently - if you feel resistance, stop and try another place. There are around 14 clips holding the screen in place. These are very fragile and will break easily. They are replaceable, but without them your iPad screen will not stay in. |