Changes to Step #3
Edit by Jessica Bombardier Shaw —
Edit approved by Jessica Bombardier Shaw
- Before
- After
- Unchanged
Step Lines
| [* black] Turn the Fluke 77 Series III Multimeter back over so that it is display side up. | |
| - | [* black] Remove the front panel with two hands by carefully prying it apart at the seam. |
| - | [* black] If the front panel does not come off easily, put a spudger in the seam between the front panel and the assembly and slowly move it around the device. Finally, remove the front panel from the assembly. |
| + | [* black] Pry the front panel from the back panel at the seam. |
| + | [* black] If the front panel does not come off easily, move a spudger along the seam until the front panel and the back panel come apart. |
| + | [* black] Remove the front panel from the assembly by lifting it off of the back panel. |