Changes to Step #3
Edit by Benjamin Cochran —
Edit approved by Benjamin Cochran
- Before
- After
- Unchanged
Step Lines
| [* black] Turn the Fluke 77 Series III Multimeter back over so that it is display side up. | |
| [* black] Pry the front panel from the back panel at the seam. | |
| - | [* black] If the front panel does not come off easily, move a plastic opening tool along the seam until the front panel and the back panel come apart. |
| - | [* black] Remove the front panel from the assembly by lifting it off of the back panel. |
| + | [* black] If the front panel does not come off easily, move a plastic opening tool along the seam until the panels separate completely. |