Changes to Step #2
Edit by Andrew Optimus Goldheart —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
Step Lines
| [* black] Using the pointed end of a spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below. | |
| + | [* icon_note] There is a small, square, plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly. |
| + | [* icon_note] If replacing the proximity sensor make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display. |