Changes to Step #1
Edit by Andrew Optimus Goldheart —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board. |
|---|---|
| + | [* black] Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board |
| + | [* icon_caution] Be sure to pry on the cable head, and not on the socket itself. Prying on the socket may cause it to separate from the logic board. |