Changes to Step #5
Edit by David Hodson —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Pry up the antenna on the communications board with |
|---|---|
| + | [* black] Pry up the antenna on the communications board with a [product|IF145-002|plastic opening tool]. This is one of two antennas on the communications board. |
| [* black] The communications board is secured by T4 Torx screws. | |
| [* black] Upon removing the screws, the communications board slides out of its socket on the logic board. The connection socket style is similar to a Mini PCI Express card. |