Changes to Step #2
Edit by Ernest Vigil —
Edit approved by Lexa Hall
- Before
- After
- Unchanged
Step Lines
| - | [* black] With a prying tool, carefully lift the plastic case covering the logic board and set aside. |
|---|---|
| + | [* black] With a prying tool, carefully lift the plastic case covering the logic board and set aside. NOTE: There may adhesive holding the bezel to the midframe. If it is difficult to pry off the bezel, heat it up around edges to soften adhesive. Do not pry on midframe hard at the top edge of the screen it will damage the LCD. |
| [* black] You need to place your prying tool in the space between the screen and the case and lift the plastic case towards the back of the phone. Be careful around the buttons. |