Changes to Step #4
Edit by Jeremy Thompson —
Edit approved by Jeremy Thompson
- Before
- After
- Unchanged
Step Lines
| + | [* black] Remove the cables circled in red by carefully lifting up on them with a prying tool. |
|---|---|
| + | [* black] Remove the flex cable with the green circle by lifting the black clip on the right with a prying tool. |
| + | [* black] There is one screw securing the motherboard at the bottom next to the Micro SD slot. (Circled in red in second picture) |
| + | [* black] Remove the motherboard from the frame (paying careful attention to the flex cables) and set it aside. |
| + | [* black] Now that we have removed the motherboard we can safely remove the glass and digitizer. |
Image 1
No previous image
Added
Image 2
No previous image
Added