Changes to Step #14
Edit by Evan Noronha —
Edit approved by Evan Noronha
- Before
- After
- Unchanged
Step Lines
| [* black] Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board. | |
| [* icon_caution] Pry up only on the connector—***not*** on the socket itself. | |
| [* black] Fold the front-facing camera cable out of the way. | |
| + | [* icon_reminder] There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly. |