Changes to Step #15
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Use the flat end of a spudger to disconnect the rear-facing camera connector from the logic board. |
|---|---|
| + | [* icon_caution] Only pry up on the connector ***not*** on the socket itself. |
| + | [* black] Fold the rear-facing camera cable out of the way. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added