Changes to Step #16
Edit by Evan Noronha —
Edit approved by Evan Noronha
- Before
- After
- Unchanged
Step Lines
| [* black] Use the flat end of a spudger to disconnect the headphone jack connector from the logic board. | |
| [* icon_caution] Pry up only on the connector—***not*** on the socket itself. | |
| + | [* icon_note] Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack. |
| [* black] Fold the headphone jack cable out of the way. |