Fix Your Stuff Community Store

Changes to Step #32

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Insert a plastic opening tool in the hole in the logic board and pry it up from the rear case.
-[* black] Slide the opening tool down the length of the inner channel to free the end of the logic board from adhesive.
+[* black] Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case.
+[* black] While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.