Fix Your Stuff Community Store

Changes to Step #33

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Pry in the hole of the logic board near the EMI shield.
-[* black] Lift the end of the logic board slowly, if you encounter significant resistance, stop prying and reapply the iOpener.
+[* black] Pry up the logic board at the lower edge of the rectangular gap, near the EMI shield.
+[* icon_caution] Lift the end of the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.