Changes to Step #34
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Slide an opening pick under the logic board between it and the battery. |
|---|---|
| + | [* black] Slide the pick from the base to the center of the logic board to cut the adhesive. |
| + | [* icon_caution] Be very careful not to cut the battery with the opening pick, a punctured battery can be very dangerous. If you encounter resistance reheat and reapply the iOpener. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added