Fix Your Stuff Community Store

Changes to Step #34

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Slide an opening pick under the logic board between it and the battery.
[* black] Slide the pick from the base to the center of the logic board to cut the adhesive.
-[* icon_caution] Be very careful not to cut the battery with the opening pick, a punctured battery can be very dangerous. If you encounter resistance reheat and reapply the iOpener.
+[* icon_caution] Take care not to cut the battery with the opening pick; a punctured battery can be very dangerous. If you encounter resistance, reheat and reapply the iOpener.