Fix Your Stuff Community Store

Changes to Step #36

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Continue to life the battery edge slowly and carefully until you can get an opening pick against the far edge of the logic board.
-[* black] Cute any adhesive holding the case edge of the logic board to the rear case.
+[* black] Continue to lift the logic board along the edge nearest the battery, until you can get an opening pick against the far edge of the logic board.
+[* black] Cut any adhesive holding the outer edge of the logic board to the rear case.