Changes to Step #8
Edit by Justin Thomas —
Edit approved by Justin Thomas
- Before
- After
- Unchanged
Step Lines
| [* icon_caution] A ribbon wire connects the rear panel to the inside of the camera. Breaking this wire would make your rear screen and buttons non-functional. | |
| - | [* black] Carefully use your fingers to tilt the back panel downward. |
| + | [* black] Carefully use your fingers to tilt the back panel downward without pulling it away from the bottom edge of the camera. |
| [* black] Use the flat end of the spudger to gently pry off the ribbon wire from the inside of the camera. | |
| - | [* icon_note] It may be helpful to move the spudger from the left of the wire to the right when trying to remove it. |