Changes to Step #7
Edit by Justin Thomas —
Edit approved by Justin Thomas
- Before
- After
- Unchanged
Step Lines
| - | [* black] Open the front panel. |
|---|---|
| - | [* icon_caution] The speaker wire is attached to the front panel. Remove the 4mm Phillips #00 screw to separate the panel from the camera. |
| + | [* icon_caution] The speaker wire is attached to the inside of the front panel. Opening the front panel forcefully may break it. |
| + | [* black] Fold the front panel to the right without pulling it away from the right edge. |
| + | [* black] Remove the 4mm Phillips #00 screw on the inside of the panel to separate the panel from the speaker wire. |