Changes to Step #1
Edit by Omar Garibay —
Edit approved by Omar Garibay
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the front cover to the main device: | |
| [* red] Three 6.0 mm Phillips screws | |
| [* orange] Three 7.0 mm Phillips screws | |
| [* yellow] Two 10.0 mm Phillips screws | |
| - | [* green] Three 7.0 mm Phillips screws (bulkier screw head than other 7.0 mm Phillips screws) |
| - | [* green] The white plastic component holding the speaker must be removed to reach the third 7.0 mm Phillips screw. |
| + | [* green] Two 7.0 mm Phillips screws (bulkier screw head than other 7.0 mm Phillips screws) |