Changes to Step #18
Edit by Walter Galan —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| + | [* black] With both plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case. |
|---|---|
| + | [* icon_note] If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the remaining adhesive. |
| + | [* black] Begin to lift the top of the display up from the frame. |
| + | [* icon_caution] Only lift the display a few inches—the display data and power cables are still connected to the logic board. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added