Changes to Step #8
Step Lines
| + | [* black] Let the remaining heat at 95°C for about 3-5 minutes to soften the adhesive |
|---|---|
| + | [* black] Use an opening tool to pry at the top, between your digitizer and the middleframe |
| + | [* black] Open it from the top, your digitizer-flex runs at the bottom |
| + | [* icon_caution] Be careful when using a heat-gun. Heat-guns don't distribute heat evenly and LCD-burns may occur |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added