Changes to Step #2
Step Lines
| + | [* black] Heat the glass panel on the back to around 85°C so the adhesive loosens |
|---|---|
| + | [* black] Use a plastic spudger or opening tool to gently pry up the glass |
| + | [* black] Carefully work your way around the edges |
| + | [* black] Be careful at the bottom. There is a flex cable running near the back-glass |
| + | [* icon_caution] Never use metal tools for this. Metal will scratch the black paint off the backplate |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added