Skip to main content

Changes to Step #2

Edit by Mary Walters

Pending approval

Before
After
Unchanged

Step Lines

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
- [* red] Two 3 mm Phillips.
- [* orange] One 4 mm Phillips on the right side.
+ [* red] Two 3 mm Phillips.Long on the outside.
+ [* orange] One 4 mm Phillips on the right side. Short in the middle.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.