Fix Your Stuff Community Store

Changes to Step #2

Edit by Andrew Optimus Goldheart —

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
-[* icon_reminder] I found that the image is incorrect on this step. The 3 mm screw is in the center. When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.
+[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.