Changes to Step #2
Edit by Suri —
Edit declined by Jake Devincenzi
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following 3 screws from the rear wall of the battery compartment: | |
| - | [* red] Two 3 mm Phillips #00. |
| - | [* orange] One 4 mm Phillips #00 on the right side. |
| + | [* red] Two 3 mm Phillips #00. (In some cases two 4mm) |
| + | [* orange] One 4 mm Phillips #00 on the right side. (In some cases one 3mm, see above) |
| [* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes. |