Changes to Step #2
Edit by [deleted] —
Edit approved by Taylor Dixon
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following 3 screws from the rear wall of the battery compartment: | |
| [* red] Two 3 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.) | |
| [* orange] One 4 mm Phillips #00 on the right side. | |
| [* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes. | |
| + | [* icon_note] These screws easily strip, so be careful while taking these particular screws out. |