Changes to this Step
Edit by Olli —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use an iPod opening tool to carefully pry the battery connector up from the ends closest to the top and bottom edges of the iPhone. |
|---|---|
| - | [* icon_caution] Do not pry against the pressure contact. |
| - | [* black] Remove the pressure contact from the iPhone. |
| + | [* black] Use an iPod opening tool to carefully pry the battery connector up from the ends closest to the top and bottom edges of the iPhone |
| + | [* black] watch out not to damage the antenna pressure contact |
| + | [* black] remove the antenna contact |
| + | [* icon_caution] Upon re-assembly: Make sure all metal-to-metal contact points of the antenna contact as well as its contact point on the rear panel are fat free. If necessary, clean them with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues. |