Fix Your Stuff Community Store

Changes to Step #7

Edit by klubn —

Pending approval

Before
After
Unchanged

Step Lines

[* black] Remove the following five screws securing the connector cover to to the logic board:
[* red] One 2.3 mm Phillips
[* orange] Two 1.6 mm Phillips
[* yellow] One 1.4 mm Phillips
[* green] One 4.8 mm Phillips
+[* icon_caution] When re-assembling, start off with replacing the 4.8 mm Philips screw first, then the 2.3 mm. ''This is to ensure there is no mix-up, and avoid rendering the LCD and digitizer useless.''