Changes to Step #7
Edit by Rudy Boyer —
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following five screws securing the connector cover to to the logic board: | |
| [* red] One 2.3 mm Phillips | |
| [* orange] Two 1.6 mm Phillips | |
| [* yellow] One 1.4 mm Phillips | |
| [* green] One 4.8 mm Phillips | |
| [* icon_caution] When re-assembling, start off with replacing the 4.8 mm Philips screw first, then the 2.3 mm. ''This is to ensure there is no mix-up, and avoid rendering the LCD and digitizer useless.'' | |
| + | [* black] When re-assembling, don't let the 2.3mm Phillips fall between the camera and the chassis. The camera is magnetic and it is difficult to retrieve the screw. |