Changes to Step #6
Edit by Shiva Empranthiri —
Edit approved by Shiva Empranthiri
- Before
- After
- Unchanged
Step Lines
| [title] Desolder Switch Solder Joints | |
| - | [* black] Locate the switch which you would like to replace on the underside of the PCB. If the switch cannot be found easily, then the assistance of a digital multimeter can help. Simply put your multimeter into "continuity test mode" and probe away to find your switch. |
| + | [* black] Desolder the joints holding the switch to the PCB. |
| + | [* black] Remove the switch and solder the new switch in place. |