Fix Your Stuff Community Store

Changes to Step #3

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* red] Carefully flip the back panel over to locate the attached ribbon cable.
-[* orange] Use the Phillips #000 screwdriver to unscrew the two .793 mm Phillips #000 screws attaching the ribbon cable to the rear panel.
+[* orange] Remove the two Phillips screws attaching the ribbon cable to the rear panel.
[* icon_note] Take the opportunity to remove the Left and Right triggers, they have hinges that may break and springs that may jump away.