Changes to Step #42
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge. |
|---|---|
| + | [* black] Slide the pick along the Lightning connector ribbon cable and under the logic board. |
| + | [* icon_caution] Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable. |
| + | [* black] Leave the pick under the Lightning connector cable to keep the adhesive separated. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added