Fix Your Stuff Community Store

Changes to Step #45

Edit by Evan Noronha —

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* black] Carefully insert the flat end of a spudger between the rear-facing camera and the top of the logic board.
[* black] Pry the logic board up enough to grab it with your fingers.
[* icon_caution] Be extremely careful not to damage the rear-facing camera cable, or any logic board components.
- [* icon_note] If the logic board does no lift easily, there may still be adhesive holding it to the rear case. Try sliding the pick farther before prying again.
+ [* icon_note] If the logic board does not lift easily, there may still be adhesive holding it to the rear case. Try sliding the pick farther before prying again.