Changes to Step #46
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Lift the logic board by the camera end and gently pull the Lightning connector housing out of the rear case. |
|---|---|
| + | [* black] Remove the logic board from the iPad. |
| + | [* icon_caution] If there is any resistance from the Lighting port cable stop pulling to avoid ripping the cable. Slide the opening pick under the length of the cable again to fully free it from the rear case. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added