Changes to Step #2
Edit by Andrew Optimus Goldheart —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [* red] Remove the two 9.5 mm T9 Torx screws from the WI-Fi board. |
|---|---|
| + | [* black] Lift the Wi-Fi board straight up from its socket in the upper metal case. |
| + | [* black] Leaving the Wi-Fi board antenna cable in place, move the Wi-Fi board aside, exposing the screw labeled "C3" that was beneath it. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added