Fix Your Stuff Community Store

Changes to Step #2

Edit by Morgan Vann —

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

-[* red] Remove the two 9.5 mm T9 Torx screws from the WI-Fi board.
+[* red] Remove the two 9.5 mm T8 Torx screws from the WI-Fi board.
[* black] Lift the Wi-Fi board straight up from its socket in the upper metal case.
[* black] Leaving the Wi-Fi board antenna cable in place, move the Wi-Fi board aside, exposing the screw labeled "C3" that was beneath it.