Changes to Step #4
Edit by Elizabeth Kamine —
Edit approved by Elizabeth Kamine
- Before
- After
- Unchanged
Step Lines
| - | [* red] Using a Phillips #000 Precision Screwdriver, remove the seven 4.0 mm screws that connect the metal plate to the motherboard. |
|---|---|
| + | [* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps. |
| + | [* red] Remove the seven 4.0 mm screws that connect the metal plate to the motherboard. |
| [* orange] Remove the three 4.0 mm screws that connect the metal hinges to the camera body. |