Changes to Step #5
Edit by Elizabeth Kamine —
Edit approved by Elizabeth Kamine
- Before
- After
- Unchanged
Step Lines
| [* black] Carefully lift the metal backing from the motherboard. | |
| [* icon_caution] Do NOT completely remove the metal backing yet. There is a data transfer ribbon connecting the metal backing to the motherboard. | |
| - | [* black] Using your finger, gently release the safety latch that holds the ribbon in place. |
| - | [* black] Slide the ribbon out from its socket and it is now safe to completely remove the metal backing. |
| + | [* black] Press your finger on the top of the latch and pull it down and towards you to open the safety latch and free the ribbon. |
| + | [* icon_caution] Be careful when removing the safety latch because it is fragile and may break easily. |
| + | [* black] Slide the ribbon out from its socket. |
| + | [* icon_note] It is now safe to completely remove the back cover from the camera. |