Fix Your Stuff Community Store

Changes to Step #2

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Use the flat end of a spudger/your fingernail to flip up the clear protective flap on the ribbon cable ZIF socket. Use the flat end of a spudger/your fingernail to lift the white bar 90°, this allows removal of the cable from the black ZIF socket. Slide the cable out of the black ZIF socket. DO NOT PRY the Black ZIF socket off the mother board.
-[* icon_note] For more info on how to disconnect ZIF connectors, check out the [guide|25629|Recognizing & Disconnecting Cable Connectors guide|stepid=64969|new_window=true].
+[* black] Use the flat end of a spudger or your fingernail to flip up the clear protective flap on the ribbon cable ZIF socket.
+[* black] Using the flat end of a spudger or your fingernail, lift the white bar 90° (this unlocks the black ZIF connector, allowing you to remove the cable from its socket). Slide the cable out of the black ZIF socket. DO NOT PRY the Black ZIF socket off the mother board.
+ [* icon_note] For more info on how to disconnect ZIF connectors, check out the [guide|25629|Recognizing & Disconnecting Cable Connectors guide|stepid=64969|new_window=true].