Changes to Step #2
Edit by Simon Krauter —
Edit approved by Simon Krauter
- Before
- After
- Unchanged
Step Lines
| [title] Disconnect silver ribbon | |
| - | [* black] Use the metal tweezers or your fingers to pull up on the plastic tab on the silver ribbon, and disconnect it from the motherboard. |
| + | [* black] Use the metal tweezers or fingers to grip the silver ribbon close to the pin connector on the motherboard. |
| + | [* black] Gently pull the plastic tab parallel to the device, and work it back and forth until the silver ribbon disconnects from the pin connector attached to the motherboard. |
| + | [* icon_caution] Be very careful to pull along the device, not away from the device. It is possible to damage the pin connector in this step. |