Changes to this Step
Edit by Nick Lovera —
Edit approved by Nick Lovera
- Before
- After
- Unchanged
Step Lines
| [title] Back Case | |
| - | [* black] Use a Torx T-6 star-bit screwdriver to unscrew four 7.38 mm screws from the battery housing. |
| - | [* black] Unscrew four 7.15mm screws from the back casing. |
| + | [* black] Use a Torx T-6 star-bit screwdriver to unscrew the four 7.38 mm screws from the battery housing. |
| + | [* black] Unscrew the four 7.15mm screws from the back casing. |
| [* black] Use the blue plastic opener tool along the seam of the case to pry off the front casing. | |
| [* icon_note] Pry from the bottom of the calculator as the case hooks into the top. |