| - | [title] Casing |
|---|
| - | [* black] Remove 4 screws from battery housing with T-6 star-bit from 28-bit driver kit. |
|---|
| - | [* black] Remove 4 screws from back casing with T-6 star-bit from 28-bit driver kit. |
|---|
| - | [* black] Pry off back casing from front casing using spudger along the seam of the case (start on back, case hooks into the front). |
|---|
| + | [* black] Remove battery cover. |
|---|
| + | [* black] Slide the red lock up. |
|---|
| + | [* black] Slide the metal tab to the right of the bottom battery. |
|---|
| + | [* black] Remove the 3-Volt Lithium Coin Cell Battery. |
|---|
| + | [* black] Slide the red lock down. |
|---|
| + | [* black] Slide the metal tab to the right of the top battery. |
|---|
| + | [* black] Remove the 3-Volt Lithium Coin Cell Battery. |
|---|