Changes to Step #1
Step Lines
| - | [title] |
|---|---|
| + | [title] Back Case |
| [* black] Unscrew four 7.38mm screws from battery housing using a T-6 star-bit from the 28-bit driver kit. | |
| [* black] Unscrew four 7.15mm screws from battery housing using a T-6 star-bit from the 28-bit driver kit. | |
| [* black] Pry off back casing from front casing using using blue spudger along the seam of the case start on the bottom as the case hooks into the top. |