Changes to Step #1
Edit by Teena Carnegie —
Edit approved by Teena Carnegie
- Before
- After
- Unchanged
Step Lines
| [title] Back Case | |
| - | [* red] Using a Torx, T-6 star-bit screwdriver unscrew four 7.38 mm from battery housing. |
| + | [* red] Using a Torx, T-6 star-bit screwdriver, unscrew four 7.38 mm screws from battery housing. |
| [* orange] Unscrew four 7.15 mm screws from back casing. | |
| - | [* black] Using the blue plastic opener tool |
| + | [* black] Using the blue plastic opener tool along the seam of the case, pry off front casing. |
| [* icon_note] Start prying from the bottom of the calculator as the casing hooks into the top. |