Changes to Step #3
Edit by Lauren Noyes —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use the pick side of the spudger to insert into the 5 plastics tabs to split the front and rear panels. |
|---|---|
| - | [* black] Do not remove the back panels quickly. There is a wire connection that will be broken if too much force is applied. |
| + | [* black] Use a small pointed tool (ex. pen point or a screwdriver tip SL1.5) to insert into the 5 plastics tabs to split the front and rear panels. |
| + | [* icon_caution] Do not remove the back panels quickly. There is a wire connection that will be broken if too much force is applied. |
| + | [* icon_caution] CAUTION! Be careful not to force tabs inward because it will result in breaking the tabs. |