Changes to Step #1
Edit by Paul Haas —
Edit approved by Evan Noronha
- Before
- After
- Unchanged
Step Lines
| [title] Removing the Case Screws | |
| - | [* red] Remove rubber stand from the lower portion of the device. Use a phillips head screw driver, size (PH00 or PH0) to remove the six screws located under the rubber stand. |
| + | [* red] Remove rubber stand from the lower portion of the device. Use a phillips head screw driver, size (PH00 or PH0) to remove the six screws located under the rubber stand. The two band screws being 6.97 mm and four case screws being 9.11 mm in length. |