Changes to Step #1
Step Lines
| [title] Cartridge Faucet | |
| [* black] Shut off the hot and cold water valves underneath the sink by twisting them clockwise until they are tight. | |
| [* icon_note] The appearance of these valves will differ from sink to sink, but most operate the same. | |
| - | [* black] To test that the water has been completely shut off, try turning on the sink like you would normally. If no water comes out, you're in luck! |
| + | [* black] To test that the water has been completely shut off, try turning on the faucet like you would normally. If no water comes out, you're in luck! |
| + | [* icon_reminder] When reopening the valves after the repair, leave the faucet in its on position. This will prevent pressurized air from building up in the faucet cartridge. |