Fix Your Stuff Community Store

Changes to Step #1

Edit by Alfred Bee —

Edit approved by Kristen Gismondi

Before
After
Unchanged

Step Lines

-[* red] Remove the two black Phillips 4.2mm on the right side of the camera by using a #0 screw
-[* orange] Remove the two black Phillips 4.2mm on the left side of the camera by using a #0 screw
-[* yellow] Remove the black Phillips 4.2mm on the bottom of the camera by using a #0 screw
+[* red] First remove the two black 4.2mm screws on the right side of the camera by using a Phillips #0 screwdriver.
+[* orange] Next remove the two black 4.2mm screws on the left side of the camera by using a Phillips #0 screwdriver.
+[* yellow] Finally remove the black 4.2mm screws on the bottom of the camera by using a Phillips #0 screwdriver.