Fix Your Stuff Community Store

Changes to Step #3

Edit by Aryan Potdar —

Edit approved by Aryan Potdar

Before
After
Unchanged

Step Lines

[title] Remove the fan
-[* red] Use a small M2.5 Phillips Screwdriver to remove the two M2.5 x 4.45 mm screws surrounding the fan.
+[* red] Use a small M2.5 Phillips screwdriver to remove the two M2.5 x 4.45 mm screws surrounding the fan.
[* icon_note] Carefully place these screws to the side, separately from the screws from part one.
[* orange] This screw has a warranty seal covering it. You may void the warranty by disassembling the system further. If you are concerned about the warranty, use compressed air with the laptop partially disassembled.