Skip to main content

Changes to Step #9

Edit by Gwendolyn

Edit approved by Gwendolyn

Before
After
Unchanged

Step Lines

-[* icon_reminder] Turn the computer onto its opposite edge so the right display screw is now easily accesible.
+[* icon_reminder] Turn the computer onto its opposite edge so the right display screw is now easily accessible.
[* icon_note] Before removing the last display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage.
[* red] Remove the last 5.6 mm T8 Torx screw securing the display to the upper case.